[China Glass Net] Preparation Materials: The first step of the preparation of the bathroom glass film is to prepare the filming tools, such as tape measure, small wallpaper knife, watering can, water scraping, water squeezing, large towel and other large towels.
The bathroom glass film is on the frontstep:
The size of the glass is measured, and the size of the cut glass film is matched with the size of the glass so as not to cause the material to be wasted due to the improper size of the cut. Secondly, if you want the quality and effect of the film to be more perfect, you must first spray the glass that needs to be coated with water to reduce the dust, so that you can have a good dust-free environment when pasting the glass film.
Bathroom glass film second step:
After the glass cleaning is completed, first place a large towel that is not burred under the glass to be cleaned, so as to prevent the water from flowing to the outside and damaging the wall surface. Cleaning the glass is an important step in the filming process. Whether the glass cleaning is clean or not directly affects the glass. The quality of the film.
Bathroom glass film third step:
After sticking the glass film, first spray some water on the front and back sides of the glass film to remove the deposit on the glass film caused by static electricity, then peel off the plastic film on the cut glass film, spray water, and paste it on the glass. Then squeeze the water out from top to bottom, and then cut out the extra side.
Bathroom glass film fourth step:
Check the quality of the paste. When the glass film is pasted, check the quality of the glass to see if there are any corners, whether there are bubbles, whether there are bubbles, and whether there are wrinkles. When it is determined that there is no problem, it is considered to be completely filmed.
Multi-Size Short Sleeve Shirt,Kids'Shirt,Custom Kids' Print Shirt,Soft Kids'Striped Shirt
SHAOXING GUANGQI TRADING CO.,LTD , https://www.sxgqtrading.com